Thom Biller Software Updates

4/1/08 - Upgrade v8.03h available for all  programs

All programs should install this upgrade as soon as possible.  It offers automatic REVS Medicaid eligibility checking.  You must install REVSPC on each workstation that will be running the automatic checks.  Here is the Revspc v3.3 installation zip file.  Here are the MassHealth REVSPC installation instructions (for v3.2 but they apply to v3.3 as well).

The upgrade assumes that you have already run up712b below.

Here is the up803h.exe upgrade. Right-click on the link and "Save As" to your desktop.  Then run it using the password you will receive by email.  The file is about 25MB in size, so it will take at least a few minutes to download on a fast internet connection.   Some Internet providers cut off large downloads early, without warning, so make sure the file you receive is the full size.  It is too large to download over a dial-up connection.  If you have any trouble downloading the upgrade, please contact me and I will send you a CD -- Larry

Here is the update documentation.

1/14/08 - Upgrade v7.12b available for all  programs

All programs should install this upgrade as soon as possible.  It has a number of changes to support new DPH regulations.  It was revised today, 1/14/08 to correct an SDR fatal error problem on valid 2007 screenings.

The upgrade assumes that you have already run up710c below, or the earlier v7.12b posted on 1/3.

Here is the up712b.exe upgrade. Right-click on the link and "Save As" to your desktop.  Then run it using the password you will receive by email.  The file is about 25MB in size, so it will take at least a few minutes to download on a fast internet connection.   Some Internet providers cut off large downloads early, without warning, so make sure the file you receive is the full size.  It is too large to download over a dial-up connection.  If you have any trouble downloading the upgrade, please contact me and I will send you a CD -- Larry

Here is the update documentation.

10/29/07 - Upgrade v7.10c available for all  programs

All programs should install this upgrade as soon as possible.  It includes new secondary billing routines..

The upgrade assumes that you have already run up708a below.

Here is the up710c.exe upgrade. Right-click on the link and "Save As" to your desktop.  Then run it using the password you will receive by email.  The file is about 25MB in size, so it will take at least a few minutes to download on a fast internet connection.   Some Internet providers cut off large downloads early, without warning, so make sure the file you receive is the full size.  It is too large to download over a dial-up connection.  If you have any trouble downloading the upgrade, please contact me and I will send you a CD -- Larry

Here is the update documentation.

Generally Useful Documentation and Utilities

Here is the Revspc v3.3 installation zip file.  Here are the MassHealth REVSPC installation instructions (for v3.2 but they apply to v3.3 as well).

Here is the current Thom Biller User's Guide, in an Adobe PDF format.  Click here to view it, or right-click to save it to your computer.  It is quite large, so it may be preferable to save it to your computer and then open it.

Here are instructions for moving Thom Biller to a new computer when replacing an old one.

Here are instructions for installing Thom Biller on a new workstation within an existing network installation.

Here is the DPH ERA Remit and Batch Pay Protocol.

Here is a link to the VFPSETUP.EXE  program for installing Visual FoxPro 9.  It is also included in your Thom Biller upgrades that begin with "7." and should be in your home directory, so it is unlikely that you would need to download it.

Listing of Prior Upgrades

8/17/07 - Upgrade v7.08a was posted

It included additional bug fixes, laser outputs, and the new "GEN - Generic" HIPAA run type. 

6/26/07 - Upgrade v7.06a was posted

It included some minor bug fixes and some additional laser output formats.

5/30/07 - Upgrade v7.05e was posted

It offered additional NPI support and printing of new Form 9 laser forms.

5/3/07 - Upgrade v7.05a was posted

All programs should have installed this upgrade  It offers NPI support.

2/23/07 - Upgrade v6.12b was posted

All programs should have installed this upgrade.  Its primary purpose is to prepare for a major Thom Biller revision coming soon that uses the most recent version of Microsoft's Visual FoxPro language (version 9)

10/11/06 - Upgrade v6.10a was posted

All programs, including off-site programs, should have installed this upgrade as soon as possible.  It has new rate information, among other changes.

8/9/06 - Upgrade v6.08b was posted

All programs, including off-site programs, should have installed this upgrade as soon as possible.  It is needed for handling changes in DPH remit files that will begin with the August remit files. 

4/24/06 - Upgrade v6.04b was posted

All programs, including off-site programs, should have installed this upgrade.  It has some useful reporting improvements.  It replaces up604a released on 4/21 that had a bug in it. 

2/7/06 - Upgrade v6.02a was posted

All programs, including off-site programs, should have installed this upgrade.  It has several useful changes including improved calculation of the primary insurer for SDRs.

[ Return to Top ]